Facts: Nauticat 43
Price: SEK 1,400,000
Model year: 1983
Length: 13.0 m
Beam: 4.20 m
Length in the waterline: 10.0 m
Draft: 1.90 m
Displacement: 17 tons
Ballast: 4,300 kg (lead)
Homeport: Stockholm, Sweden
Engine: Ford Lehman diesel SP, 6 cylinder, fresh water cooled, fully refurbished replacement engine in 2015
Engine power: 135 hp
Engine hours: 150 hours
Speed: 7-8 knots
Action radius: 900 nautical miles
Fuel diesel: 900 L
Fresh water: 800 L
Mast height above water surface: 19.9 m
Sail area: 141 sq m
Standing height in fore and aft cabin: 1.83 – 1.90 m
Standing height in wheelhouse and saloon: 1.92 – 1.97 m
Mobile: +46 733-70 48 26
Office: +46 42-14 40 50, firstname.lastname@example.org
The Nauticat 43 is a good choice for long distance sailing or beautiful archipelago sailing. The boat's stability, strength and good sailing characteristics in light as well as in rough weather conditions make for a great experience. It is also a boat that you can live in all year round. The boat is well maintained, well equipped, ready to sail safely and comfortably. Much of the equipment has been replaced in recent years. The Nauticat 43 is a good investment and maintains a good resale value.
ENGINE AND OTHER MECHANICAL EQUIPMENT
New replacement engine 2015, operating time 150 hours (Bosö Marina).
Powerful and reliable engine that can withstand driving the 17-tonne ship in heavy seas.
Hydraulic steering, Two steering positions, one in the wheelhouse and the other on the aft deck.
Rudder shaft of acid-resistant steel. Fiberglass rudder with beard and bronze bearings.
Spare steering with direct attachment to the rudder shaft.
Ford Lehman diesel SP 135 hp 6 cylinder, fresh water cooled
Borg Warner hydraulic recoil
Morse Teleflex to both steering positions
Engine compartment fan
Stainless steel diesel tanks. Total tank capacity 900 l
Recovery system and extra filter system. Magnetic filter.
Stainless propeller shaft with water-lubricated cutless bearings
Starter key in inner steering compartment
Cushions with high-quality Chinese sand fabric
High quality curtains
Sleeping mattresses in the aft cabin with stainless coil springs
Two bunks with an additional board make you a full-length/wide double berth
Plenty of storage space along the hull sides
Roller blind for blackout
TOILET IN FRONT
Front WC has wc with hand pump. Shower in the toilet.
Stainless steel toilet tank with connection to tire drain.
Mosaic floor, clean and neat
Extra skylight, for ventilation and light
Separate shower room
Toilet connected to tank or lake.
Large and easy-to-use galley, even when underway
Kitchen hood so the boat stays fresh
Plenty of parking spaces and storage
Compressor-driven cool box of approx. 180 l. Well equipped with glasses, crockery and cutlery for a crew of 8 people.
The hot water is supplied by a 25 liter water heater. Connected via the engine cooling system or 220 V
Double stainless sinks
Sea water faucet
Fresh water tap, hot / cold
Manual cold water pump
Water tanks, 2 stainless steel tanks 2x 400 litres
Stainless steel stove with oven, 2 flames, shut-off tap
Cover plate over the stove
Two sofas facing each other where you and your friends can have a cool lunch when the temperature approaches 30 degrees. The teak table can be lowered to accommodate two people.
The wheelhouse and upper salon form a representative and spacious whole with a good view in all directions through windows of tempered glass in aluminum frames.
The wheelhouse includes, in addition to navigation equipment, complete engine instrumentation and electrical central.
The engine is installed in an effectively sound-insulated engine room with access through the aft guest cabin.
The large U-shaped sofa in the upper salon is an excellent place for socializing and dining for 8-9 people.
Large fridge with freezer compartment and a bar cabinet.
Large and good navigation table with storage spaces underneath. Otherwise good storage space.
Refrigerator with cooling compartment
Steering of bow thrusters
Switchboards/fuses/earth-fault circuit breakers
Curtains throughout the boat
AFT GUEST CABIN
Spacious guest cabin with its own door
Two berths, upper berth and double berth
Plenty of storage space. Big closet
Flap table with bottle rack
Reading lights for both berths
Spacious and pleasant aft cabin with luxurious interior
Large aft cabin with wide double berth. Spring mattress for best sleeping comfort
Good ventilation and light
Aft two fixed windows which, together with the 6 opening windows on SB and BB sides, make the cabin light and spacious
Good storage spaces behind the hull. Separate settee on the port side. Bookshelf and wardrobe.
Roller blind for blackout
The boat is equipped with instrumentation and navigation equipment.
(Outer steering position YST, Inner steering position IST)
6 inch Suunto compass external control station YST
Neco compass inner steering position IST
Plotter Garmin 4012 YST or IST
Sonar Garmin 4012/ YST or IST
GPS 1 Garmin 128 with external antenna IST
GPS 2 Garmin 128 with built-in antenna YST
GPS 3 Puck for connection to PC IST
Radar Furuno IST
Autopilot Robertson AP3000 IST
Rudder indicator YST
VDO engine oil pressure gauge, oil pressure backlash, fuel gauge, tachometer IST
YST and IST bow thruster control unit
Battery check meter IST
Wind instrument Simrad IS15 YST
Bilge pump pump panel IST
Bow thruster Sleipner SP95Ti 6 kW
LED light sources throughout the boat installed in 2022.
220V shore current with earth fault circuit breaker
220 V generator 3.5 kW Travel Power 220V AC 16 A Electrolux
Battery charger # 1, 50 A
Battery charger # 2 Victron charger and inverter 40 A, 2.2 KW
Portable inverter 300 W
Alternator 1 , 100 A
Generator 2, 100 A
4 consumable batteries (purchased in 2022)
2 starter batteries (purchased in 2021)
1 bow thruster battery (purchased in 2021)
1 windlass battery (purchased in 2021)
1 Electric bilge pump in the keel
1 fresh water pump (purchased in 2021)
1 sea water pump (purchased in 2022)
Water heater 25 l Quick water heater B3 25L (purchased in 2023), 220 V electric cartridge, alternatively the cooling water from the engine.
Heater Mikuni MX40, 4.7 kW (older model)
Deck and superstructure of hand-laminated fiberglass. Tempered glass windows with aluminum frames. Deck and hull are joined with aluminum strip, the strip is bolted with stainless steel bolts.
The teak deck is in good condition. Thick teak 12 mm, with wide framework. Can be sanded many times. Treated with Yacht Farben Teak treatment (Golden Teak).
Wide and fine deck tires. Plenty of seating on the aft deck. Nice overview from the steering position on the aft deck.
Windlass aft, tape and Danfortankare, remote control and tape gauge
Windlass for, chain 70 m, Danfortankare 30 kg.
Drained anchor box/gasol
LPG bottle composite P10
Flush nozzle for anchor/deck washing
Bow thruster 9.5 hp Sleipner, maneuverable in the wheelhouse and on the aft deck. Local extra battery
Shore power connection
Team train with two side openings
2 Ankarolina in the bow 30 m
Jump buttons amidships
Sprayhood large with stainless steel frames
Bathing platform with ladder
Blue canvas around aft deck as wind protection
Full navigation instrumentation see instrumentation and navigation
Hand laminated fiberglass hull with mat and roving. The boat is built in accordance with Lloyd's Register of Shipping rules. The hull is fitted with longitudinal and transverse stiffeners. 4.3 ton lead keel, attached with stainless steel bolts. Fiberglass engine bed with steel inserts.
Sanded bottom (performed in 2020)
Epoxy-treated bottom International Gelshield (made in 2021)
Bottom color International Insjöfärg (performed in 2021)
Bottom color measurement carried out in 2022 (approved for lakes)
SAILS AND RIGGING
All electrical cables in the masts replaced and also the contacts replaced
LED lights in lanterns
The masts cleaned in 2021 with aluminum plaster
Glove screws cleaned and treated with glove screw oil
Silver electro-oxidized aluminum masts with internal cases of the brand Selden. Sound insulation in the masts.
Mainmast halyard winch/reef winch
1 x Andersen 28
Andersen 16 halyard winch/reef winch
2 x Lewmar 8
Headsail 2 x Lewmar 48
Mainsail 1 x Lewmar 30 ST
Mesa 1 x Andersen number 8
Mainsail 38 m2
Mesa 13.5 m2
Furling genoa 1 66 m2 on Furlex
Storm jib 13.2 m2
Spinnaker 126 m2
2 Bomkapel, Stor and mesan
SAFETY AND FIRE PROTECTION
Automatic fire extinguishing in the engine room
2 fire extinguishers
Shut-off valve Gasol
Drained LPG space
Manual bilge pump
Bilge pump, Electric
Life raft in container (should be repacked)
Earth fault circuit breaker
Flame retardant fabrics
8 safety lines
DINGHY WITH OUTBORDER
Inflatable boat with 2.5 hp outboard motor
SUPPORT AND COVER
Supports (8 pcs) Crado model CY4
Cover frame made of regular timber
3 tarpaulins (heavy) 5x7 m
The information provided is expected to be correct but not guaranteed